技术参数
| nUC-M_CB4.0 | nUC-S_CB4.0 | nUC-B_CB4.0 | |
| ICS CODE | NH0045 | NH0046 | NH0047 |
| Interface | |||
| Digital Input (24VDC Max 500mA PNP) | 4 | 8 | 24 |
| Digital Output(24VDC Max 500mA NPN) | 4 | 8 | 24 |
| Analog Input (24VDC Max 500mA PNP) | 0 | 0 | 2 |
| Analog Output(24VDC Max 500mA NPN) | 0 | 0 | 2 |
| CAN | 0 | 0 | 1 |
| USB | 0 | 0 | 1 |
| Safety Input (24VDC Max 500mA PNP) | 2 | 4 | 4 |
| Network 10M/100M | 1 | 2 | |
| COM | 1 | ||
| TF Card | 8G | ||
| Special peripheral interfaces | 1 (RS485, DI1/DO1) | ||
| Management Mode | Web, Client | ||
| Communication Protocol | Modbus-TCP, Ethernet/IP | ||
| Communication Protocol options with controller | DeviceNet, TCP/IP Socket | CANopen, DeviceNet, TCP/IP Socket | |
| MCU Type | ST CORTEX-M7 | ||
| IP Rating | 30 | ||
| Power Supply [VDC] | 24 to 48 | ||
| Maximum Power [W] | 100 | ||
| Status LED | Power, Run,Data,Error,Input,Output | Power, Run,Data,Error,Input,Output,nOPLC,Link | |
| Ambient Temperature [℃] | -10 to +55 | ||
| Function | nURIO: Universal Robots distributed extension IO | ||
| nMiRIO: MiR Robots Netwrok IO executor | |||
| nUC: Special equipment controller for NONEAD | |||
| nIO: NONEAD independently developed pc-based PLC, distributed extension IO module | |||
| nOPLC: NONEAD independent research and development open source PLC | |||
| Other: IO development platform based on Ethernet;The Internet of things development platform | |||
| … | |||
拥有8个数字输入，8个数字输出，1个10M/100M网络接口，1个调试串口，通过级联可扩展最大48个数字输入，48个数字输出。
使用拓德nOPLC控制器，可无限级联。
拓德通用控制器 nUC-S CB4.0
